If you own a 2010 Dodge Ram and have recently changed the oil, it’s important to reset the oil change indicator to ensure accurate maintenance tracking. Resetting the oil change notification is a simple process that can be done in just a few steps. In this article, we will guide you through the process of resetting the oil change on your 2010 Dodge Ram.
Step 1: Prepare for the Reset
Before you begin the reset procedure, it is important to gather a few things. First, you will need the ignition key to access the vehicle’s dashboard controls. Additionally, make sure the engine is turned off and that the vehicle is parked on a level surface for safety.
Step 2: Access the Dashboard Controls
Insert the ignition key into the vehicle’s ignition and turn it to the “ON” position. Do not start the engine. Once the ignition is turned on, various indicators and notifications on the dashboard should illuminate.
Step 3: Locate the Oil Change Indicator
Look for the oil change indicator on the dashboard. It is usually represented by an oil can icon or wording such as “Oil Change Required” or “Change Engine Oil.” The exact location and appearance may vary slightly depending on the trim level and optional features of your 2010 Dodge Ram.
Step 4: Reset the Oil Change Indicator
Once you have located the oil change indicator, press and hold the “STEP” or “SELECT” button on the dashboard controls. Continue holding the button until the oil change indicator begins to flash. This usually takes about 10 seconds.
Step 5: Confirm the Reset
After the oil change indicator starts flashing, release the button and wait for a message or notification on the dashboard confirming that the oil change has been reset. This message may appear as “Oil Life Reset” or “Oil Change Reset.” Once you see this confirmation, the oil change on your 2010 Dodge Ram has been successfully reset.
Step 6: Turn off the Ignition
Turn off the ignition key to complete the reset process. You can now remove the key from the ignition and close the vehicle’s doors.
Final Thoughts
Resetting the oil change on your 2010 Dodge Ram is a straightforward procedure that ensures accurate maintenance tracking and helps you maintain the vehicle’s longevity and performance. By following the steps outlined in this article, you can easily reset the oil change indicator on your own, saving time and money.
Remember to refer to your vehicle’s owner’s manual for specific instructions or consult a professional if you encounter any difficulties during the process.
Frequently Asked Questions Of How To Easily Reset Oil Change On 2010 Dodge Ram: Quick Guide
How Often Should The Oil Be Changed In A Dodge Ram 2010?
The oil in a Dodge Ram 2010 should be changed every 5,000 to 7,500 miles, or as recommended by the vehicle’s manufacturer.
Can I Reset The Oil Change Light On My Dodge Ram 2010 Myself?
Yes, you can easily reset the oil change light on your Dodge Ram 2010 by following a few simple steps outlined in the vehicle’s owner’s manual.
What Happens If I Don’t Reset The Oil Change Light On My Dodge Ram 2010?
If you don’t reset the oil change light on your Dodge Ram 2010, it will continue to display and may give you inaccurate information about when your next oil change is due.
How Can I Reset The Oil Change On My Dodge Ram 2010 Without The Owner’s Manual?
If you don’t have the owner’s manual, you can still reset the oil change on your Dodge Ram 2010 by using the vehicle’s built-in computer system. Consult a professional or refer to online resources for specific instructions.