Subaru is known for its reliable and stylish vehicles. However, if you want to give your Subaru a unique look or need to replace a damaged or worn-out emblem, removing the Subaru emblem is the first step. In this guide, we’ll walk you through the process of removing a Subaru emblem without damaging your car’s finish.
Materials You’ll Need
- Heat gun or hairdryer
- Fishing line or dental floss
- Rubber or plastic pry tool
- Goo Gone or adhesive remover
- Microfiber cloth
- Car wax (optional)
Step 1: Park Your Car in a Safe and Well-Lit Area
Find a well-lit and safe space to work on your car. Make sure the area is well-ventilated if you’re using an adhesive remover.
Step 2: Heat the Emblem
Use a heat gun or a hairdryer to warm up the adhesive behind the emblem. Hold the heat source a few inches away from the emblem and move it around to heat the adhesive evenly. Be careful not to overheat and damage the car’s paint.
Step 3: Use Fishing Line or Dental Floss
Once the adhesive is warm, slide a piece of fishing line or dental floss behind the emblem. Use a back-and-forth sawing motion to cut through the adhesive. This will separate the emblem from the car’s surface.
Step 4: Gently Pry the Emblem
After cutting through the adhesive, use a rubber or plastic pry tool to gently pry the emblem away from the car. Work around the emblem to release it from the remaining adhesive.
Step 5: Remove Residue
Use an adhesive remover like Goo Gone to dissolve any remaining adhesive on the car’s surface. Apply the adhesive remover to a microfiber cloth and gently rub the residue until it’s completely removed.
Step 6: Clean and Wax (Optional)
Once the adhesive is removed, clean the area with soap and water. If desired, you can apply a car wax to the area to restore shine and protect the paint.
Final Thoughts
By following these steps, you can safely remove the Subaru emblem from your car without causing any damage. Whether you’re replacing it with a new emblem or leaving the area bare for a sleek look, take your time and be cautious throughout the process. If you’re unsure or uncomfortable with any step, consider seeking professional help to avoid any potential damage to your vehicle.
Frequently Asked Questions For How To Remove Subaru Emblem: Proven Method
How Can I Safely Remove A Subaru Emblem?
To safely remove a Subaru emblem, start by using a heat gun or hairdryer to soften the adhesive. Gently pry it off with a plastic tool, then use adhesive remover to clean any residue.
What Is The Best Method To Remove A Subaru Emblem?
The best method to remove a Subaru emblem is by using a heat gun or hairdryer to soften the adhesive, then gently prying it off with a plastic tool. Afterwards, use adhesive remover to clean any remaining residue.
Is It Possible To Remove A Subaru Emblem Without Damaging The Paint?
Yes, it’s possible to remove a Subaru emblem without damaging the paint by using a heat gun or hairdryer to soften the adhesive. Then gently pry it off with a plastic tool to minimize any potential paint damage.
Can I Use Household Items To Remove A Subaru Emblem?
You can use household items such as a heat gun or hairdryer, plastic prying tools, and adhesive remover to safely and effectively remove a Subaru emblem.