Tesla owners know that one of the most eye-catching features of their vehicles is the unique wheel covers. Whether it’s a Model S, Model 3, Model X, or Model Y, these wheel covers provide a sleek, futuristic look that sets Tesla apart from other vehicles on the road. However, there may come a time when you need to remove the wheel covers for maintenance, cleaning, or replacing the tires. In this article, we will guide you through the process of removing Tesla wheel covers without damaging them.
Tools You Will Need
Before you begin, make sure you have the following tools at hand:
- Jack
- Lug wrench
- Tire iron
- Plastic pry tool
Step 1: Prepare Your Vehicle
Start by parking your Tesla on a flat surface and engaging the parking brake. For added safety, you can place wheel chocks behind the rear wheels to prevent any unexpected movement.
Step 2: Loosen the Lug Nuts
Using the lug wrench or tire iron, slightly loosen the lug nuts on the wheel that has the wheel cover you want to remove. Do not fully remove the lug nuts at this time, just loosen them enough to make it easier to remove them later when the car is jacked up.
Step 3: Jack Up the Car
Consult your Tesla owner’s manual to locate the recommended jacking points for your specific model. Use a jack to carefully lift the car off the ground, ensuring it is secure before proceeding.
Step 4: Remove the Lug Nuts and Wheel Cover
Now that the car is raised, you can fully remove the lug nuts and carefully take off the wheel cover. Tesla wheel covers are designed to be easily removable, and they are typically held in place by clips or tabs. Gently pry the wheel cover away from the rim using a plastic pry tool to avoid scratching the cover or the rim.
Step 5: Inspect and Clean
Once the wheel cover is removed, take the time to inspect it for any damage or wear. Clean both the wheel cover and the exposed rim before reassembly. This is also a good opportunity to check the tire pressure and the condition of the brakes and suspension components.
Step 6: Reassemble
When you are ready to reassemble, carefully place the wheel cover back onto the rim, ensuring that it aligns properly. Apply even pressure around the perimeter of the cover to secure it back in place. Finally, tighten the lug nuts and lower the car back to the ground.
Frequently Asked Questions Of How To Remove Tesla Wheel Cover: Easy Steps For Quick Removal
How Do I Safely Remove A Tesla Wheel Cover?
To safely remove a Tesla wheel cover, start by locating the small notch on the edge and carefully insert a flathead screwdriver to pop it off.
What Tools Do I Need To Remove A Tesla Wheel Cover?
You will need to have a flathead screwdriver to safely and easily remove a Tesla wheel cover.
Can I Remove The Tesla Wheel Cover By Hand?
While it’s possible to remove the Tesla wheel cover by hand, using a flathead screwdriver can make the process easier and prevent damage.
Is It Necessary To Remove The Tesla Wheel Cover For Maintenance?
Yes, it is necessary to remove the Tesla wheel cover for various maintenance tasks such as tire rotation and brake service.
Conclusion
Removing Tesla wheel covers is a relatively simple process that can be completed with just a few basic tools. By following the steps outlined in this guide, you can safely remove and reassemble your Tesla wheel covers without incurring any damage. Remember to always refer to your Tesla owner’s manual for model-specific instructions and safety precautions before performing any maintenance on your vehicle.