Keeping your Acura TSX running smoothly involves regular maintenance, and one of the essential tasks is changing the oil. After changing the oil, you may notice that the oil change light on your Acura TSX’s dashboard is still illuminated. If you have recently changed the oil and want to reset the oil light, don’t worry. In this blog post, we will guide you through the process of resetting the Acura TSX oil light.
Step 1: Turn on the ignition
Before you can reset the oil light, make sure your Acura TSX is parked and the engine is off. Insert the key into the ignition and turn it to the “On” position. Do not start the engine, just make sure the instrument cluster lights up.
Step 2: Locate the trip odometer
Look at the instrument cluster to find two buttons labeled “SEL” and “RESET.” These buttons are usually located near the trip odometer display. Use the “SEL” button to navigate through the options on the instrument cluster until you find the oil life percentage or the oil change light.
Step 3: Enter maintenance mode
Once you have found the oil life percentage or oil change light, press and hold the “RESET” button for approximately 10 seconds. This action will enter the maintenance mode, allowing you to reset the oil light.
Step 4: Reset the oil light
While still holding the “RESET” button, you will notice that the oil life percentage or oil change light starts flashing. Continue to hold the button until the flashing stops and the oil life percentage resets to 100% or the oil change light turns off. This indicates that the oil light has been successfully reset.
Step 5: Verify the reset
After resetting the oil light, turn off the ignition, then start your Acura TSX’s engine. Check the instrument cluster to ensure that the oil light is no longer illuminated. If the oil light stays off, congratulations, you have successfully reset the Acura TSX oil light.
Tips and precautions:
- Before resetting the oil light, make sure you have recently changed the oil in your Acura TSX.
- Resetting the oil light does not substitute changing the oil. Follow your vehicle’s recommended maintenance schedule for regular oil changes.
- If you are unsure about the process or have any concerns, consult your Acura TSX owner’s manual or contact your local Acura dealership for assistance.
Frequently Asked Questions On How To Reset Acura Tsx Oil Light: The Ultimate Guide
How Do I Reset The Oil Light On My Acura Tsx?
To reset the oil light on your Acura TSX, follow these simple steps: 1. Turn the ignition key to the “on” position without starting the engine. 2. Press the “Trip” button until “Oil Life” is displayed. 3. Press and hold the “Trip” button until the oil life percentage resets to 100%.
How Often Should I Reset The Oil Light On My Acura Tsx?
You should reset the oil light on your Acura TSX every time you change the oil or when the oil life indicator reaches 15% or lower.
What Does It Mean When The Oil Light Comes On In My Acura Tsx?
When the oil light comes on in your Acura TSX, it means that the engine is not receiving sufficient lubrication. It is important to check the oil level and add oil if necessary.
Can I Reset The Oil Light Myself Or Do I Need To Take It To A Mechanic?
You can reset the oil light on your Acura TSX yourself, without the need for a mechanic. It is a simple procedure that can be done in a few minutes.