If you are an Acura MDX owner, you may have encountered the “Oil Change Required” or “Service Due Soon” message on your instrument cluster. This warning indicates that it is time to change your oil and perform routine maintenance on your vehicle.
Resetting the oil light after an oil change is a simple but necessary task to ensure accurate maintenance reminders on your MDX. In this article, we will guide you through the step-by-step process of resetting the oil light on your Acura MDX.
Step 1: Get Ready
Before beginning the reset process, make sure you have the following items:
- Acura MDX
- Ignition key
Step 2: Turn on the Ignition
Insert the ignition key into the keyhole and turn it to the “on” position. Press the “Start/Stop” button once without pressing the brake pedal (for push-button start models).
Step 3: Navigate the Multi-Information Display
On the instrument cluster, locate the button labeled “INFO” or “INFO/MENU.” Press this button until you see the message “maintenance info” or “vehicle information” on the display.
Step 4: Access Maintenance Reset Menu
Once you have found the maintenance information screen, press and hold the “Select/Reset” button, typically located on the steering wheel or center dash area, until a new menu appears. This menu should provide you options such as oil life, tire rotation, or other maintenance items.
Step 5: Reset the Oil Light
Scroll through the menu using the “Up” or “Down” buttons until you locate the “Reset” option related to your oil change or oil life. Press and hold the “Select/Reset” button again until the oil life percentage or maintenance reminder resets to 100% or shows no further indication of required maintenance.
Step 6: Verify Reset
Once you have completed the reset process, turn off the ignition and remove the key. Wait a few seconds, then turn the vehicle back on to ensure that the oil light has been successfully reset. The “Oil Change Required” or “Service Due Soon” message should no longer be displayed on the instrument cluster.
Frequently Asked Questions For How To Reset Oil Light Acura Mdx : A Quick And Easy Guide!
How Do I Reset The Oil Light On My Acura Mdx?
To reset the oil light on your Acura MDX, follow these steps:
1. Start by turning the ignition to the “On” position without starting the engine. 2. Locate the trip knob on the instrument cluster and press and hold it. 3. While holding the trip knob, turn the ignition to the “Off” position. 4. Release the trip knob, then turn the ignition back to the “On” position. 5. Wait for the oil light to blink and then release the trip knob. 6. The oil light should now be reset, indicating that the oil life has been reset.
Conclusion
By following these simple steps, you can easily reset the oil light on your Acura MDX and ensure that your maintenance reminders are accurate. It is crucial to reset the oil light after each oil change to keep track of your vehicle’s maintenance schedule properly. Regular oil changes are essential for optimal engine performance and longevity, so it’s important not to ignore the oil change indicator.
Remember to consult your vehicle’s owner manual for any specific instructions or variations that may apply to your Acura MDX model. If you are unsure or encounter any difficulties during the reset process, it is recommended to consult a professional Acura technician for assistance.