Back in 2005, the authorities in Oklahoma put some rules in place for car window tinting. If you are cruising around town in the Sooner State and want to make sure you’re not breaking any laws, it’s important to be aware of these regulations. To avoid any unpleasant surprises, you’ll need to have all the information and documents about your car’s window tint on hand. That includes knowing how dark or reflective your tint can be, as well as any other additional rules that apply. Take a few minutes to read up on these guidelines below and stay on the right side of the law. After all, nobody wants to face a hefty fine just because they didn’t do their homework.
Two crucial factors to consider with auto window tinting are Visible Light Transmission (VLT) and Visible Light Reflection (VLR). In this discussion, I’ll explain both concepts, starting with VLT.
1. Window Tint Darkness in Oklahoma (VLT)
Window Tint Darkness or Visible light transmission (VLT) is a measure of the amount of light that passes through a film. It’s measured in percentages and can stretch from 0% to 100%. The higher the percentage, the more visible light is transmitted through the film.
Every state has specific legal limitations. Therefore, for tinted windows, the amount of light that can pass through can differ from state to state. This is certainly the case in Oklahoma, where the rules vary depending on whether you’re driving a passenger vehicle or a multi-purpose vehicle. To avoid any confusion or trouble with the law, it’s important to familiarize yourself with the tinting regulations specific to Oklahoma. Take some time to carefully read through these laws and make sure you fully understand how much light may pass through your car’s tinted glass. By doing so, you can ensure that you stay on the right side of the law and avoid any unwanted fines or penalties.
Tint darkness laws for passenger vehicles (sedans) in Oklahoma:
Windshield: You can use non-reflective tint above the manufacturer’s AS-1 line or on the top 5 inches of the windshield.
Front Side windows: You can use maximum up to 25% tint darkness.
Back Side windows: You can use a maximum 25% tint darkness for backside windows.
Rear Window: You can use maximum 25% tint darkness for rear windows.
Tint darkness laws for multi-purpose vehicles (SUVs and vans) in Oklahoma:
Windshield: You can use non-reflective tint above the manufacturer’s AS-1 line or on the top 5 inches of the windshield.
Front Side windows: You can use up to 25% tint darkness for front side windows.
Back Side windows: You can use any darkness for backside windows.
Rear Window: You can use any darkness for rear windows.
2. Window Tint Reflection in Oklahoma (VLR)
Window Tint Reflection or Visible light reflection (VLR) is the amount of light that a window film reflects. For measuring the amount of light that can pass through your car’s tinted windows in Oklahoma, it’s all about percentages. The VLR (or visible light reflection) percentage can range from 0% to 100%, and the lower the percentage, the less visible light is reflected into the car. This means that more sunlight will be blocked, which can be a good thing if you’re looking to keep your car cool on a hot day.
It’s important to note that Oklahoma’s window tint law does allow for a certain percentage of window reflection (VLR) when using a tint. So, if you’re planning on tinting your car’s windows, make sure you pay close attention to this regulation as well. By adhering to the guidelines set forth by the state, you can ensure that your car’s tint is both stylish and legal.
Tint reflection laws for passenger vehicles (sedans) in Oklahoma:
Front Side windows: Window tint installed on the front side windows of a passenger vehicle must not be more than 25% reflective.
Back Side windows: Window tint installed on the back side windows of a passenger vehicle must not be more than 25% reflective.
Tint reflection laws for multi-purpose vehicles (SUVs and Vans) in Oklahoma:
Front Side windows: Window tint installed on the front side windows of a multipurpose vehicle must not be more than 25% reflective.
Back Side windows: Window tint installed on the backside windows of a multipurpose vehicle must not be more than 25% reflective.
Other Oklahoma Window Tint Rules and Regulations:
For window tinting in Oklahoma, it’s important to take the rules and regulations seriously. Besides adhering to specific percentages of darkness and glare on each window, there are plenty of other guidelines you’ll need to follow as well.
Side Mirrors: Dual side mirrors are required by Oklahoma law if the rear window of a vehicle is tinted. This is to ensure that the driver has an adequate field of view while operating the vehicle, and to reduce the risk of accidents.
Restricted Colors: Oklahoma law prohibits the use of any color-altering materials on vehicle windows. This includes any film, tint, or other material that changes the color of the glass. This is to ensure that the visibility of the driver is not impaired, and that the vehicle can be easily identified by law enforcement officials.
Certificates: Film manufacturers are required to certify the film they sell in Oklahoma. This means that the film must meet certain standards for visibility and safety. If you are considering having your windows tinted, it is important to check with your dealer to ensure that they are using certified film.
Stickers: Oklahoma law does not require a sticker or other form of identification to show that a vehicle’s windows have been legally tinted. However, it’s important to keep the bill, invoice or any proof of the legal tinting in the vehicle in case of any inspection by the law enforcement.
Medical Exceptions: Oklahoma law allows for medical exemptions for special tint. This means that individuals who have a medical condition that requires them to have a darker tint on their windows may get a special permit. The individuals should contact the Oklahoma Department of Public Safety for more information.
Penalties: Violations of Oklahoma’s window tint laws are considered misdemeanors, and penalties for violating the law are outlined in Section 17-101 of the Oklahoma statutes. These penalties may include fines and/or imprisonment. It’s important to comply with the window tint laws to avoid any penalties.
Conclusion
According to Oklahoma laws, for passenger vehicles (sedans), the windshield can have a non-reflective tint above the manufacturer’s AS-1 line or on the top 5 inches. The front side windows can have a maximum of 25% tint darkness, while the back side and rear windows can also have a maximum of 25% tint darkness. For multi-purpose vehicles (SUVs and vans), the windshield can also have non-reflective tint above the manufacturer’s AS-1 line or on the top 5 inches. The front side windows can have a maximum of 25% tint darkness, and the back side and rear windows can have any darkness. It’s important to check for any updates on the laws and compliance with the laws to avoid any penalties.
Disclaimer
The information on this site is provided for informational purposes only and should not be construed as legal advice or as a substitute for the advice of an attorney. No user of this site, or any other person or entity that may have received this information, shall rely upon the information contained as creating an attorney-client relationship between such user and Car Glass Advisor. The rules and regulations pertaining to car window tint in Oklahoma may change at any time. Therefore, please contact a local lawyer licensed to practice in your jurisdiction.