Subaru’s Homelink system allows you to integrate your garage door opener, security system, and other home automation devices with your car. This feature provides convenience and enhanced security for Subaru owners. However, programming Homelink can be a bit tricky for first-time users. In this guide, we will walk you through the steps to program your Subaru Homelink system.
Before You Begin
Before diving into the programming process, there are a few things you need to prepare:
- Make sure your Subaru vehicle is parked outside the garage to prevent any accidental door movements during programming.
- Have the remote control for your garage door opener or other home devices ready. This remote will be used to synchronize with the Homelink system.
- Clear any existing programming from the Homelink buttons by holding the first and third buttons simultaneously until the indicator light starts flashing rapidly.
Programming Steps
Now that you have everything ready, follow these steps to program your Subaru Homelink system:
Step 1: Turn On The Ignition
Start by turning the ignition to the “ON” position without starting the engine. This will power the Homelink system.
Step 2: Choose A Button
Decide which button on the Homelink system you want to program for your garage door opener or home device. You can choose any of the three buttons to assign a specific function.
Step 3: Sync With The Remote Control
Hold your garage door opener remote control 1-3 inches away from the Homelink buttons. Press the open/close button on your remote control and the button on the Homelink system you wish to program simultaneously. Wait for the indicator light on the Homelink to flash slowly. This may take up to 30 seconds. Once it starts flashing slowly, the programming is successful.
Step 4: Test The Connection
Press the programmed Homelink button in your Subaru and observe if your garage door or home device responds accordingly. If the programming is successful, the door or device should activate as intended.
Additional Tips
Here are some additional tips to keep in mind while programming your Subaru Homelink system:
- If you have difficulty programming, refer to the owner’s manual of your garage door opener for specific instructions.
- If your garage door opener is equipped with rolling codes, additional steps may be required to complete the programming process. Consult your garage door opener manual for rolling code programming.
- In case of a power outage or battery replacement in your vehicle, you may need to reprogram the Homelink system.
Frequently Asked Questions On How To Program Subaru Homelink: Easy Step-by-step Guide
How Do I Program Subaru Homelink?
To program your Subaru Homelink, start by holding the Homelink button in your car and the desired garage door opener remote simultaneously.
Why Won’t My Homelink Program To My Garage Door Opener?
If your Homelink won’t program to your garage door opener, ensure you are following the correct programming instructions for your specific model of Homelink and garage door opener.
Can I Program More Than One Garage Door Opener To My Homelink?
Yes, you can program multiple garage door openers to your Subaru Homelink as long as they are compatible with the Homelink system in your car.
What If My Subaru Homelink Is Not Responding?
If your Subaru Homelink is not responding, ensure the battery in the remote is working, and try reprogramming the Homelink using the correct instructions for your model.
Conclusion
Programming your Subaru Homelink system may seem daunting at first, but by following these steps and tips, you can easily integrate your garage door opener or home devices with your Subaru vehicle. Enjoy the convenience and security that the Homelink system provides!