How to Easily Add Transmission Fluid in a 2015 Chrysler 200: Step-by-Step Guide!

How to Put Transmission Fluid in a 2015 Chrysler 200

Regular maintenance is crucial to keeping your vehicle in smooth running condition. One essential aspect of car maintenance is checking and replenishing the transmission fluid. In this article, we will guide you through the process of putting transmission fluid in a 2015 Chrysler 200. It is important to follow these steps carefully to ensure the proper functioning of your transmission system.

Step 1: Gather the Necessary Tools and Materials

Before you begin, make sure you have all the required tools and materials. You will need:

  • Transmission fluid (check your vehicle’s manual for the recommended type)
  • Funnel
  • Rag or paper towels
  • Car jack and jack stands
  • Protective gloves

Step 2: Locate the Transmission Fluid Dipstick

The transmission fluid dipstick is typically located near the back of the engine bay. It is often labeled and has a distinctive handle for easy identification. Once the dipstick is located, remove it from the dipstick tube.

Step 3: Prepare the Vehicle

Park your Chrysler 200 on a flat surface with the parking brake engaged. It is also recommended to place wheel chocks behind the rear wheels for added safety. Additionally, let the engine cool down before proceeding with the next steps.

Step 4: Check the Fluid Level

With the dipstick removed, wipe it clean using a rag or paper towel. Reinsert the dipstick into the tube completely and then pull it out again. This will give you an accurate reading of the transmission fluid level.

Check the fluid against the markings on the dipstick or refer to your vehicle’s manual for the correct level. If the fluid level is below the “Add” or “Min” mark, you will need to add transmission fluid.

Step 5: Add Transmission Fluid

Using a funnel, carefully pour the recommended transmission fluid into the dipstick tube. Add a little at a time and make sure not to overfill. It is crucial to use the correct type of fluid recommended for your vehicle. Be sure to consult your owner’s manual for the exact specifications.

Check the fluid level periodically using the dipstick to avoid overfilling. If necessary, repeat the process until the fluid reaches the appropriate level.

Step 6: Reinstall the Dipstick

After you have achieved the correct fluid level, carefully reinsert the dipstick into the tube and ensure it is fully seated.

Step 7: Clean Up

Once the transmission fluid is properly added, remove the funnel and wipe any spills or drips with a rag or paper towel. It’s crucial to keep the engine bay clean and free of any fluids to prevent damage or accidents.

Step 8: Double-Check

Turn on your vehicle and let it idle for a few minutes to warm up. Then, with the engine running, shift through each gear from park to reverse and drive, allowing the transmission fluid to circulate.

After shifting through all gears, park the vehicle and let the engine idle. Once again, check the fluid level using the dipstick. If needed, add more fluid to maintain the proper level.

Frequently Asked Questions For How To Easily Add Transmission Fluid In A 2015 Chrysler 200: Step-by-step Guide!

Can I Put Transmission Fluid In A 2015 Chrysler 200 On My Own?

Yes, you can add transmission fluid to your 2015 Chrysler 200 on your own. It’s a simple process that you can do easily at home.

What Type Of Transmission Fluid Does A 2015 Chrysler 200 Require?

The 2015 Chrysler 200 requires ATF+4 transmission fluid. Make sure to use the recommended fluid for optimal performance.

How Often Should I Check The Transmission Fluid In My 2015 Chrysler 200?

It is recommended to check the transmission fluid level in your 2015 Chrysler 200 at least once a month to ensure it is at the proper level.

How Do I Know If My 2015 Chrysler 200 Needs Transmission Fluid?

If you notice symptoms like slipping gears, delayed engagement, or strange noises coming from your transmission, it may be a sign that your 2015 Chrysler 200 needs transmission fluid.


Putting transmission fluid in a 2015 Chrysler 200 is a relatively straightforward process if you follow these step-by-step instructions. Remember to exercise caution and adhere to safety guidelines throughout the process. Regularly checking and maintaining the proper transmission fluid level will help ensure the longevity and optimal performance of your vehicle’s transmission system.

Leave a Comment