Master the Art of Manually Resetting Chrysler 200’s Electronic Throttle Control

How to Reset Electronic Throttle Control Manually Chrysler 200

The Electronic Throttle Control (ETC) system in a Chrysler 200 is responsible for regulating the amount of air that flows into the engine. It helps maintain optimal engine performance and fuel efficiency. Occasionally, the ETC system may need to be reset to ensure proper functioning. In this blog post, we will guide you through the process of resetting the Electronic Throttle Control manually on your Chrysler 200.

Step 1: Prepare for the Reset

Before starting the reset process, make sure you have the necessary tools and equipment:

  • Protective gloves
  • Safety goggles
  • Wrench or socket set
  • Owner’s manual (for reference)

It’s important to wear protective gloves and safety goggles to ensure your safety throughout the process.

Step 2: Locate the Throttle Body

The throttle body is the component responsible for controlling the airflow into the engine. To reset the ETC on your Chrysler 200, you need to locate the throttle body. It is usually located on the side of the engine, attached to the intake manifold.

Refer to the owner’s manual or consult a reliable online source for the exact location of the throttle body in your specific model of Chrysler 200.

Step 3: Disconnect the Battery

Before working on any electrical component of your vehicle, it is essential to disconnect the battery. Locate the battery in your Chrysler 200, usually found in the engine compartment or sometimes in the trunk.

Using the appropriate wrench or socket set, loosen the nut on the negative (-) terminal of the battery. Carefully remove the negative cable from the battery and set it aside, ensuring it does not come into contact with any metal surfaces.

Step 4: Remove the Throttle Body

Once the battery is disconnected, you can proceed to remove the throttle body. Using the appropriate socket or wrench, carefully loosen and remove the bolts that secure the throttle body to the intake manifold.

Gently disconnect any electrical connectors or hoses connected to the throttle body. Take note of their positions and connections for easy reinstallation.

Step 5: Clean the Throttle Body

With the throttle body removed, you will have better access to clean it thoroughly. Use a throttle body cleaner and a clean cloth or brush to remove any dirt, grime, or carbon deposits that may have accumulated on the throttle body.

Ensure you clean all the surfaces, including the throttle plate and the throttle bore, as these can affect the airflow and cause issues with the ETC system.

Step 6: Reinstall the Throttle Body

Once the throttle body is clean, carefully reinstall it back onto the intake manifold. Reconnect any electrical connectors or hoses that were disconnected during the removal process.

Tighten the bolts securing the throttle body to the intake manifold, ensuring they are snug but not overtightened.

Step 7: Reconnect the Battery

Now that the throttle body is reinstalled, it’s time to reconnect the battery. Place the negative cable back onto the negative (-) terminal of the battery.

Using the appropriate wrench or socket set, tighten the nut on the negative terminal to secure the cable in place.

Step 8: Perform a Test Drive

With the battery reconnected, start your Chrysler 200 and perform a test drive. Take it for a short drive, allowing the ETC system to recalibrate and adjust to the new throttle body settings.

During the test drive, pay attention to any abnormal engine performance or warning lights on the instrument cluster. If you notice any issues, consult a professional mechanic for further inspection.

Frequently Asked Questions On Master The Art Of Manually Resetting Chrysler 200’s Electronic Throttle Control

How Do I Reset The Electronic Throttle Control On My Chrysler 200?

To reset the electronic throttle control on your Chrysler 200, follow these steps: 1. Turn off the engine. 2. Disconnect the negative battery cable. 3. Wait for at least 10 minutes. 4. Reconnect the negative battery cable. 5. Start the engine and let it idle for a few minutes.


Resetting the Electronic Throttle Control manually in your Chrysler 200 is a straightforward process that requires basic mechanical knowledge and precautions. By following the steps outlined in this blog post, you can ensure optimal performance of your vehicle’s ETC system.

Remember to always consult your owner’s manual or seek the assistance of a professional mechanic if you are unsure about any step. Safety should be the top priority when working with any vehicle’s electrical or mechanical components.

Keep your Chrysler 200 running smoothly and enjoy your driving experience!

Leave a Comment